How To Grow Zamnesia Magic Mushroom Grow Kits

STEP 1

Remove the lid from the grow kit and pour water on the grow kit until the container is completely filled. Put the lid back on and let it soak for 9–12 hours, preferably in a cold place like the refrigerator.

STEP 2

After 9–12 hours, remove the lid from the container and clean it under running water. Don't throw it away, you will need the lid later. Drain all excess water from the kit.

STEP 3

Pour approximately 150ml of clean tap water into the grow bag. Place the grow kit into the grow bag with the water. Spray water on the inner sides of the bag only once during setup. 

It’s very important to keep the humidity level correct at all times. Optimal relative humidity is 85–100%.

STEP 4

Fold the top of the grow bag twice (about 3cm) and fasten with paperclips. Place the bag in a bright place. Choose a warm spot between 23–27°C with access to indirect daylight, never direct sunlight. A good place to put the kit is somewhat higher on a bookshelf.

STEP 5

Once the first pins have appeared, refresh the air by opening the bag 1–3 times a day. 

Mushrooms grow on oxygen and therefore need fresh air daily to grow properly. Any CO2 buildup will be removed when opening the bag.

STEP 6

After 2–4 weeks, your mushrooms are ready to harvest. Harvest all mushrooms, even the tiniest ones, just before the veils underneath the mushroom caps start to tear. THIS IS VERY IMPORTANT!

To learn more about the perfect harvesting moment check out this blog article

STEP 7

After harvesting the first flush you can prepare the kit for a new flush. Usually a grow kit will produce about 3 flushes. To prepare the kit for the next flush you have to soak it again as described in step 1. From there you can repeat the same process.