Cannolator Cannabis Extractor

Cannolator Cannabis Extractor: Make Your Own Pure Cannabis THC Oil

The Cannolator Cannabis Extractor is a complete weed oil extraction kit that allows you to make cannabis oil from marijuana. The extractor is simple to use and can reliably extract 2g of pure THC cannabis oil from 20g of weed in as little as 2 hours. The Cannolator uses less alcohol for the oil extraction than other methods which makes it very economical to use. The kit includes the Cannolator extractor, glass tubes, measuring cups, pipettes, cleaning brushes and a detailed booklet with instructions how to use it.

HOW TO MAKE THC CANNABIS OIL WITH THE CANNOLATOR

Making your own cannabis oil with THC is very easy with the Cannolator. The Cannolator doesn’t require butane gas but works with alcohol that you can get anywhere cheaply.

WHAT YOU NEED TO EXTRACT THC CANNABIS OIL

• Cannolator
• Two glass mixing jars
• Digital scale (up to 0.1 gram)
• 20g of your favourite weed to extract 2g of pure THC cannabis oil. You will later dilute the concentrated oil with olive oil to make 10ml (250 drops) of weed oil. You can use all parts of your plant except the branches and the roots!
• 1 Litre of 96% drinkable alcohol (Ethanol, ethyl alcohol, "drinking alcohol", no isopropanol!)
• Baby bottle warmer (to heat the mixing jar)
• (Optional) Electric aquarium air pump

10 EASY STEPS TO MAKE CANNABIS THC OIL WITH THE CANNOLATOR

1. Weigh the glass mixing jar. If you know the weight of the jar it will help to know how much weed oil you make.
2. Weigh 20 grams of dried marijuana and grind it to a fine powder with a grinder or with your hands.
3. Fill the Cannolator glass tube with the dried and crushed weed. You will notice a hole at the bottom of the glass tube which lets the alcohol through but not the weed.
4. Press the weed down gently while filling the glass tube. For this you can use the opposite end of the included scraper tool.
5. Set the filled glass tube in the Cannolator and pull the hose from the air pump through the hole in the bracket of the Cannolator and allow it to come out from the top of the mixing glass. This will make the evaporation 3-4 times faster. Do not let the hose hang into the alcohol.
6. Gradually and slowly pour 120 ml of alcohol from the mixing glass into the top of the glass tube. Use 6x the weight of your weed for the amount of alcohol. For example, if you have 20 grams of weed you would use 120ml (6 x 20ml) of alcohol.
7. Set the baby bottle heater to its maximum heat of 100°C. If you set the glass jar in the bottle heater, the alcohol will quickly start to bubble and evaporate. Be careful and make sure that your area is well ventilated! (Open the window). Alcohol boils and vaporizes at 78°C. As long as there is alcohol in the jar, the temperature of the mix will not go over 80°C.
8. Since you use 96% alcohol this means it contains 4% water. When all the alcohol has evaporated, the temperature of the tincture will rise above 78°C. At this point, the water evaporates.
9. When the water has evaporated, the temperature of the tincture will reach 100°C. You will notice small air bubbles. These bubbles are created by the decarboxylation that produces the THC. It will take approximately 2 hours until the mix will settle down and no new bubbles appear. At this point you will have made about 2 grams of pure THC weed oil!
10. Weigh the mixing cup that now contains the finished weed oil. Subtract the weight of the empty cup from the weight of the mixing bowl with the oil. For example, if you just made 2 grams of oil, you will now add 8 grams of olive oil to dilute the THC cannabis oil 5x. Mix the concentrated THC oil and the olive oil well for 5 minutes. Your 5x diluted THC cannabis oil is ready! Pour your THC cannabis oil in a 10ml pipette bottle.

More information related to this product: